• Peak Output Current: 4 A source and 6 A sink peak current.
• Isolation Rating: 5.7 \(\text{kV}_{\text{RMS}}\) reinforced isolation barrier with up to 1500 \(\text{V}_{\text{DC}}\) working voltage between secondary drivers.
• Switching Frequency: Supports high-frequency switching up to 5 MHz.
• Common-Mode Transient Immunity (CMTI): Minimum 125 V/ns.
• Package Type: 16-pin SOIC (300-mil) surface-mount device (SMD).
• Configurability: Can be set up as two low-side drivers, two high-side drivers, or a half-bridge driver with programmable dead time

• Switch Mode Power Supplies (SMPS)
• Uninterruptible Power Supplies (UPS) and Inverters
• Power Factor Correction (PFC) stages
• LED Lighting Power & TV Power Boards
• AC-to-DC Converters

• Switch-mode power supplies (SMPS) [1]
• LED drivers and adapters [1]
• DC-DC converters [1]
• Motor control circuits

1. Pin 1 (Left): Gate (G) — Used to trigger/control the MOSFET.
2. Pin 2 (Middle): Drain (D) — Connected internally to the metal tab/heatsink.
3. Pin 3 (Right): Source (S) — Typically connected to system ground. 

• Switch Mode Power Supplies (SMPS)
• DC-DC Converters
• LED Drivers
• Motor Control Circuits

AI Mode conversation: 0.1uf 275v X2 safety capacitor both 10mm pitch

• Pin 1 (Gate): Controls the turning on and off of the MOSFET.
• Pin 2 (Drain): The main high-voltage terminal connected to the load (electrically tied to the large central mounting tab).
• Pin 3 (Source): The return path terminal for the drain current.

• Switch-mode power supplies (SMPS)
• High-voltage isolated DC-DC converters
• Small offline power adapters and LED driver

• Maximum Repetitive Peak Reverse Voltage : 60 V
• Maximum Average Forward Rectified Current : 5.0 A
• Peak Forward Surge Current : 150 A (8.3ms half sine-wave)
• Maximum Forward Voltage Drop : 0.70 V at 5A
• Operating Junction Temperature Range : -55°C to +150°C

• 30Amp 12V &24V
• Product available as per the customer requirement
• Our product is highly appreciated by customers

• DC Voltage: 0.1 mV to 1000 V (or 9.999 mV to 999.9 V depending on sub-range)
• AC Voltage: 0.1 mV to 750 V
• AC/DC Current: Up to 9.999 A (including µA and mA ranges)
• Resistance: 0.01 Ω up to 99.99 MΩ / 100 MΩ
• Capacitance: 9.999 nF to 9.999 mF
• Frequency & Duty Cycle: 0.01 Hz to 5 MHz; 1% to 99%
• Temperature: -20°C to 1000°C (-4°F to 1832°F) using the included temperature probe
• Other Tests: Non-contact voltage (NCV) detection, diode test, and continuity buzzer. 

• Display: 9,999-count high-resolution triple-display LCD with an analog bar graph and backlight. 
• True-RMS: Supports accurate AC voltage and current measurements.
• Operation: Knob-free, full-button control designed for one-hand operation with auto and manual ranging.
• Power Supply: Runs on 2 × AA batteries.
• Dimensions & Weight: 146 × 74 × 34 mm; weighs approximately 125 g to 171 g 

• Automatic Identification Mode: Detects AC/DC voltage, resistance, and continuity automatically without manual dial switching.
• NCV Detection: Non-contact AC voltage detection for safe live-wire identification. 
• Display: Backlit LCD screen with a 6000-count high-resolution display.
• Convenience Functions: Data Hold, Relative Measurement (REL), and auto power-off.
• Power Source: Powered by 2 × AAA batteries.

• AC/DC Voltage: Up to 600V (or 750V AC / 999.9V DC depending on sub-range specifications)
• AC/DC Current: Up to 10A
• Resistance: Up to 60MΩ
• Capacitance: Up to 100mF
• Frequency Range: 10Hz to 10MHz
• Temperature Measurement: -30°C to 1000°C (-22°F to 1832°F)
• Continuity & Diode: Built-in buzzer for continuity checks (< 70Ω) and diode testing

• Transistor Type: N-Channel MOSFET
• Drain-Source Voltage (\(V_{DSS}\)): 60V
• Continuous Drain Current (\(I_{D}\)): 50A
• Package Type: TO-220 (TO-220AB) with an integrated heatsink tab
• Technology: Planar stripe DMOS
• Features: Low gate charge, low on-resistance, fully avalanche-rated, and an integrated reverse body diode. 
• Power Management: Active Power Factor Correction (PFC) circuits.
• Power Supplies: Switched-mode power supplies (SMPS) and DC-DC converters.
• Lighting: Electronic lamp ballasts (such as those based on halogen setups).
• Automotive & Control: Motor control systems and load switching in battery-powered applications. 

1. Gate (G): Triggers the MOSFET on/off.
2. Drain (D): Connected to the load (also connected to the metal heatsink tab).
3. Source (S): Connected to the system ground or negative rail. [1]

• FQP50N06 / FQP50N60
• STP55NF06